Inocast-MB is an alloy of Iron and Silicon, with quite high amounts of Manganese and Barium.
Chemical
Analysis
%
Si |
%
Ba |
%
Mn |
%
Ca |
%
Al |
%
Fe |
60-65 |
4-6 |
9-12 |
1.5-3.0 |
1.0-1.5 |
Balance |
Application
Gray Iron
-
Good Chill reduction particularly in iron of C.E. 3.5-3.85 %.
- Presence of Mn produces low melting compound and hence, ideally suited for low pouring temperatures.
- High Ba content makes it equally effective at higher temperatures.
- Very good fading resistance. Inoculation effect lasts longer.
S.G.Iron
- A good replacement for 75% FeSi Inoculation.
- Not recommended for fully ferritic as cast grades.
Melting Point |
1090-1200 °C. |
Size
Range |
0.2-0.7 mm, 1-3 mm, 3-6 mm, 6-10 mm |
Addition |
|
Ladle |
Late Stream |
Gray Iron |
0.15-0.3 % |
0.05-0.1 % |
S.G.Iron |
0.3-0.5 % |
0.05-0.1 % |
|
Packing |
50 Kg, 1000 Kg - HDPE Bags |
Storage |
If stored in low humidity environment in the same packing, product can be preserved for a long time. |
|
|
