InoK-MB is an alloy of Iron and Silicon, with quite high amounts of Manganese and Barium.
3-6 mm
1-3 mm
0.2-0.7 mm
Chemical Analysis
|
% Si
|
% Ba
|
% Mn
|
% Ca
|
% Al
|
% Fe
|
|
60-65
|
4-6
|
9-12
|
1.5-3.0
|
1.0-1.5
|
Balance
|
Application
Gray Iron
- Good Chill reduction particularly in iron of C.E. 3.5-3.85 %.
- Presence of Mn produces low melting compound and hence, ideally suited for low pouring temperatures.
- High Ba content makes it equally effective at higher temperatures.
- Very good fading resistance. Inoculation effect lasts longer.
S.G.Iron
- A good replacement for 75% FeSi Inoculation.
- Not recommended for fully ferritic as cast grades.
| Melting Point |
1090-1200 °C. |
|||||||||
| Size Range | 0.2-0.7 mm, 1-3 mm, 3-6 mm, 6-10 mm | |||||||||
| Addition |
|
|||||||||
| Packing | 50 Kg, 1000 Kg – HDPE Bags | |||||||||
| Storage | If stored in low humidity environment in the same packing, product can be preserved for a long time. |