InoK-S75


InoK-S75 with controlled additions of Strontium, is an extremely potent inoculant for thin section castings of Gray Iron.

3-6 mm

3-6 mm

1-3 mm

1-3 mm

0.2-0.7 mm

0.2-0.7 mm

Chemical Analysis

% Si
% Sr
% Ca
% Al
% Fe
70-78
0.8-1.3
0.1 max
0.5 max
Balance

Application

Gray Iron

  • Excellent Chill Reduction, particulars in thin sections.
  • The eutectic cell size is not reduced appreciably and hence, low shrinkage tendency.
  • Effective for gray irons with a minimum sulphur level of 0.04%.

S.G.Iron

  • Very effective in thin section S.G.Iron castings, if TRE levels are low.  Not effective if Ce levels are high in the melt.
Melting Point

1210-1325 °C.

Size Range 0.2-0.7 mm, 1-3 mm, 3-6 mm, 6-10 mm.
Addition
Ladle
Late Stream
Gray Iron
0.15-0.25 %
0.05-0.1 %
S.G.Iron
0.3-0.5 %
0.05-0.1 %
Packing 50 Kg, 1000 Kg – HDPE Bags
Storage If stored in low humidity environment in the same packing, product can be preserved for a long time.